BenQ DesignVue PD2705UA 27" 4K HDR Monitor with Ergo Stand - Manual (Page 18)

18
Power delivery of USB-C™ ports on your monitor
With the power delivery function, your monitor helps supply power to the connected
USB-C™ devices. Available power varies by port. Make sure the devices are connected
to the appropriate ports to be activated properly with sufficient power.
• A connected device needs to be equipped with a USB-C™ connector that supports
charging function via USB power delivery.
• The connected device can be charged via USB-C™ port even when the monitor is in
power saving mode.(*)
• The USB power delivery is up to 65W (PD2705U) / 90W (PD3205U). If the connected
device requires more than the delivered power for operation or for boot up (when the
battery is drained), use the original power adapter that came with the device.
• The information is based on the standard testing criteria and is provided for reference.
The compatibility is not guaranteed as the user environments vary. If a separately
purchased USB-C™ cable is used, make sure the cable is certified by USB-IF and is
full-featured, with power delivery and video / audio / data transfer functions.
PD2705U / PD2705UE / PD2705UA
USB-C™ 65W
(on the rear of the monitor)
USB-C™
(on the left side of the monitor)
5V / 3A 5V / 1.5A
9V / 3A N/A
12V / 3A N/A
15V / 3A N/A
20V / 3.25A N/A
PD3205U / PD3205UE / PD3205UA
USB-C™ 90W
(on the rear of the monitor)
USB-C™
(on the left side of the monitor)
5V / 3A 5V / 1.5A
9V / 3A N/A
12V / 3A N/A
15V / 3A N/A
20V / 4.5A N/A
*: Charging via USB-C™ in monitor power saving mode is available when the Power Awake function is
enabled. Go to System > Power Awake and select ON .