BenQ DesignVue PD2705UA 27" 4K HDR Monitor with Ergo Stand - Manual (Page 24)

24
6. Connect the power cable to the
monitor.
Plug one end of the power cord into the socket
labelled on the rear of the monitor. Do not
connect the other end to a power outlet just yet.
7. Install the back cover.
Gently lift the display up and extend it to the
maximum extended position. Then tilt the monitor
to install/remove the I/O cover easily.
Align the back cover with the holes on the back of
the monitor, and press both sides and the upper
part of the cover against the holes to lock it into
place as illustrated.
Push the lower part of the back cover toward the
monitor to secure it.
8. Organize the cables.
Route the cables via the cable clip.
9. Connect-to and turn-on the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your
region.
1
2