BenQ DesignVue PD2705UA 27" 4K HDR Monitor with Ergo Stand - Manual (Page 26)

26
How to detach the stand (for models with stand)
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the power cable. Turn off the computer
before unplugging the monitor signal cable.
2. Remove the back cover.
Gently lift the display up and extend it to the
maximum extended position. Then tilt the monitor
to install/remove the I/O cover easily.
Remove the back cover from its bottom as
illustrated. Unplug all cables carefully.
Protect the monitor and screen by clearing a flat
open area on your desk and placing a soft item like
a towel on the desk for padding, before laying the
screen face down on a flat clean padded surface.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler or
a mouse will crack the glass or damage the LCD
substrate voiding your warranty. Sliding or scraping the
monitor around on your desk will scratch or damage
the monitor surround and controls.
3. Remove the monitor stand.
While pressing and holding the quick release
button, detach the stand from the monitor.
If the monitor stand is removed for wall mounting, see
Using the monitor wall mounting kit (purchased
separately) on page 41 and the instruction manual of
your wall mount bracket (purchased separately) for
more information.
1
2