Vco2, Vco controler/vca, Modules in the pico system iii – Erica Synths Pico System III Eurorack Modular Synthesizer System (Eurorack Module) User Manual
Page 7
VCO CTRL
EXP FM
LIN FM
EXP FM
VCA CV
IN/LIN FM
VCA OUT
VCA OFFS
Adjust the tune of the VCO manually! 1V/oct CV is added to
the setting of this knob
Adjust waveshape available on the SHAPE output manually!
SHAPE CV is added to the setting of this knob
Three position switch allows you to transpose the pitch of
the VCO one octave up or down
Patch the sequencer or any FM source here
This is Waveshaper CV input. Experiment with different
modulation sources to get drones, rhythmic patterns and
fat analogue sound
This is Waveshaper wave output
This is gentle sounding Triangle wave output
VCO2
TUNE
SHAPE
1V/OCT
SHAPE CV
SHAPE
TRI
+1OCT
-1OCT
VCO2
is full analogue VCO with built in waveshaper
of unique functionality – it continuously
morphs triangle wave into pulsewave with
adjustable pulse width thus adding harmonics
to the signal on the output. The waveshape is
manually and CV controlled. VCO2 has manually
and CV controlled linear FM for experiments in
FM synthesis.
This is exponential FM attenuator for VCO1
This is linear FM attenuator for VCO2
This is VCA offset knob for manual VCA
control. At 12:00 it closes the VCA
completely, and you can use an envelope
generator to open it. If you wish to achieve
nice tremolo effects with bipolar CV from
the LFO, set the offset knob to 15:00
This is the exponential FM input for VCO1
This is VCA CV input
This is VCA audio input. If you wish to apply
linear FM to the VCO2, patch the FM source
here, and use VCA Offset knob or VCA CV to
control FM depth
This is VCA output. By default it’s connected
to the linear FM input of the VCO2
VCO CONTROLER/VCA
is intended to control FM levels of the VCOs.
It also features VCA that can be used for
manual and CV controlled Linear FM depth
control, but it also can be used as regular DC
coupled VCA for other applications.
MODULES IN THE PICO SYSTEM III