Quick start – desktop version, Quick start – eurorack version, Mixer or amplifier mixer, amplifier or headphones – Erica Synths Pico System III Eurorack Modular Synthesizer System (Eurorack Module) User Manual
Page 3
QUICK START – DESKTOP VERSION
The Pico System III is plug and play! Connect the power connector cable,
connect the MASTER OUT to mixing console or amplifier using 3,5mm
stereo cable (if you use top output connector. The system does not
output actual stereo signal – the mono signal from the output is split to
both left and right channels) or 3,5mm mono cable (if you use the
connector on the back of the system), flip the power switch and start
patching! You can also connect headphones to the MASTER OUT.
QUICK START – EURORACK VERSION
Just install the system in your eurorack case and start patching!
3,5mm mono cable
3,5mmstereo cable
mixer or amplifier
mixer, amplifier
or headphones