Erica Synths EDU DIY Wavefolder Eurorack Module Kit - Manual (Page 52)

52
Congratulations! You have completed the assembly of the mki x es.edu Wavefolder
module! Connect it to your eurorack power supply and switch it on. If there’s no
"magic smoke”, it’s a good sign that your build was successful. Patch the sawtooth signal
from the DIY.EDU VCO to the SAW-TRI input of the module and connect the OUT of the
module to a mixer. You should hear some sound which timbre will change as you adjust
the INTENSITY knob. Now you can proceed with calibration, which consists of adjusting
the multiturn trimpot. Please, follow instructions above!
Enjoy!