Epson PowerLite 1288 4000-Lumen Full HD 3LCD Projector with Wi-Fi User Manual

Page 71

Select the

Notifications

menu and press

Enter

Turn on the

SNMP

setting.

Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field.

Note:

To enter the IP address using the numeric keys on the remote control, press and hold the

Num

button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x

is a number from 0 to 255).

Enter a community name. You can enter up to 32 single-byte alphanumeric characters.

If you want this projector to receive broadcasted messages over the network, select the

Others

menu and turn on the

Message Broadcasting

setting. Administrators can broadcast messages over

the network using Epson Projector Management (Windows only).

When you finish selecting settings, select

Complete

and follow the on-screen instructions to save

your settings and exit the menus.

Parent topic:

Using the Projector on a Network