Epson PowerLite 1288 4000-Lumen Full HD 3LCD Projector with Wi-Fi User Manual

Page 201

201

Parent topic:

Related references

Projector Network Settings - Network Menu
Event ID Code List

Solutions When You Cannot Access the Projector Through the Web

If you are unable to access the projector through a web browser, make sure you are using the correct ID
and password, which are case sensitive.

Note:

You cannot change the user ID.

• You may need to log in to access some options on the Web Control screen. If you see a log in window,

enter

EPSONWEB

as the user ID and enter the password set in the projector's Network menu as the

password. The default password is

admin

• To display the Web Remote screen, enter

EPSONREMOTE

as the user ID and enter the password

set in the projector's Network menu as the password. The default password is

guest

• Make sure you have access to the network the projector is on.

Note:

The user ID and password are case sensitive.

Parent topic:

Solving Network Problems

Solutions When Network Alert E-Mails are Not Received

If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:

• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the

projector, it cannot send an e-mail.)

• Make sure you set up the projector e-mail alert settings correctly on the projector's network menu or in

the network software.

• Set the

Standby Mode

setting to

Communication On

so the network software can monitor the

projector in standby mode. Change the

Port

setting according to your network environment.

Parent topic:

Solving Network Problems