Epson Home Cinema LS11000 2500-Lumen Pixel-Shift 4K UHD Laser 3LCD Projector - Manual (Page 97)

97
Setting Options Description
Signal Format Video Range Sets the video range to match the setting of
an input source connected to the HDMI
ports
Auto : detects the video range automatically
Limited (16–235) : for brightness range
16–235
Full (0–255) : for brightness range 0–255
Overscan Auto
Off
4%
8%
Changes the projected image ratio to make
the edges visible by a selectable
percentage or automatically when
projecting a component signal
Color Space Auto
BT.709
BT.2020
Sets the conversion system for the color
space (set to
Auto for most cases)
Dynamic Range Dynamic Range
Signal Status
HDR10/HDR10+ Setting
HLG Setting
Dynamic Range : changes the range of
dark and bright areas in the image (set to
Auto for most cases)
Signal Status : displays the detected input
signal
HDR10/HDR10+ Setting : adjusts the PQ
curve of the dynamic range (available when
Dynamic Range or Signal Status is set to
HDR10 or HDR10+ )
HLG Setting : adjusts the HLG curve of the
dynamic range (available when Dynamic
Range or Signal Status is set to HLG )