Epson Home Cinema LS11000 2500-Lumen Pixel-Shift 4K UHD Laser 3LCD Projector - Manual (Page 38)

38
Setting Options Description
PJLink Password Up 32 alphanumeric characters Enter a password for using the
PJLink protocol for projector
control
(do not use spaces or any
symbols besides @)
Notified IP Address Various IP addresses Enter the IP address to receive
the projector's operating status
when the PJLink notification
function is enabled. Enter the
addresses using 0 to 255 for
each address field.
Do not use these addresses:
127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a
number from 0 to 255).
AMX Device Discovery On
Off
Set to On to allow AMX Device
Discovery to detect the projector
Control4 SDDP On
Off
Set to On to allow device
information to be acquired using
Control4 Simple Device
Discovery Protocol (SDDP)
Parent topic: Selecting Wired Network Settings