Enviro C-11212 - Manual (Page 23)

23
Secondary Installation
Figure 34. Third Stage Log Set Installation.
Figure 36. Fifth Stage Log Set Installation.
Figure 35. Fourth Stage Log Set Installation.
Figure 35: Once the logs are in
position the provided rock wool can
be placed irregularly in front of the
burner.
Figure 36: Place the embers
irregularly onto and around the front
of the burner to create a realistic
look. The ceramic fiber comes in
chunks that can be ripped into
smaller pieces.
WARNINGS: DO NOT pack this
ember material as this could create
an unsafe condition. The pieces
should be lightly placed so they don’t
block any of the burner ports.
DO NOT allow any of the embers to
rest against the pilot assembly.
Caution: Use only the type of
ember material supplied with this
fireplace. Due to the irregular size
of the ember material, there may
be more than required. Use of other
foreign materials on the burners may
create dangerous conditions.
Figure 34: The front end of the right/center log has a notch in it that is to rest around the right/center
post of the grate. The back end of the log rests on the burner tray (see Figure 33). Ensure the log does
not block any burn ports.