Enviro C-11212 - Manual (Page 22)

Secondary Installation
L
OG
S
ET AND
E
MBER
I
NSTALLATION
:
NOTE: The logs are fragile and should be handled gently.
The placement of the logs is not arbitrary. If they are positioned incorrectly, the flames can be “pinched”
and will not burn correctly. The burner, and a few of the logs come with locator pins, notches and ledges,
which make alignment easier. Using the pictures provided, carefully set the logs in place (see Figures 31
through 36).
Figure 31: Empty firebox with grate and locator pins.
Figure 32. First Stage Log Set Installation.
Figure 33. Second Stage Log Set Installation.
Figure 32: The left log and
the right log both have two
(2) holes in them that will rest
over their corresponding two
(2) locator pins pointed out in
Figure 31.
Figure 33: The bottom of the
left/center log will rest over
the locator pin on the burner
and against the grate. The top
half of the log must rest against
the back log, see Figure 32. The
center spot shown in Figure 32
is a knot in the back log for the
left/center log to rest against.
Ensure the log does not block
any burn ports.
Figure 31: The first log to
be placed is the back log.
It leans on the back of the
firebox, push it back as far
as you can.
22