beautypg.com

Command list – StarTech.com 4x4 HDMI Matrix Switcher with Audio and Ethernet Control (4K60) User Manual

Page 35

background image

34

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Command List

The following is a list of commands that you can use through a

computer’s command line to control

Matrix Switch

functions:

Notes:

All commands must be followed by pressing the

Enter

button in order to execute the command.

Commands are not case-sensitive.

Commands also work with RS232 (serial).

Command

Description

A N

Switch Output A to Input N (N = 1 - 4)

B N

Switch Output B to Input N (N = 1 - 4)

C N

Switch Output C to Input N (N = 1 - 4)

D N

Switch Output D to Input N (N = 1 - 4)

I N

Switch all Outputs to Input N (N = 1 - 4)

AB....N

Switch outputs AB to Input N (N = 1 - 4)

SETIP xxxx.

xxxx.xxxx

Setting IP, Subnet, Gateway, for a Static IP (x =

0 - 255)

IPCONFIG

Displays the current IP Configuration

RSTIP

Sets the IP configuration to DHCP mode

P0

Powers the Switch Off

P1

Powers the Switch On