beautypg.com

Web interface, Connecting the matrix switch to a computer, Accessing the web interface – StarTech.com 4x4 HDMI Matrix Switcher with Audio and Ethernet Control (4K60) User Manual

Page 16

background image

15

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

5.

Decide where in the server rack you want to install the

Matrix Switch

.

6.

Insert the

M5 Cage Nuts

(two per mounting post) into the

square mounting holes on the

Server Rack’s Mounting

Posts

.

7.

Align the

Mounting Brackets

with the

M5 Cage Nuts

on

the

Server Rack’s Mounting Post

.

8.

Insert an

M5 Screw

(two per mounting post) through the

front

Mounting Bracket

(rail) and into the

M5 Cage Nut

.

9.

Tighten the

Mounting Screws

using a

Phillips Head

Screwdriver

, be careful not to over-tighten.

Web Interface

The

Matrix Switch’s

built-in

Web Interface

enables you to

control all primary functions:

Switch

EDID Settings

System Settings

Admin - Logout

Connecting the Matrix Switch to a Computer

Connect the

Matrix Switch

to a

Computer

on the same

network.

Accessing the Web Interface

1.

Open a

Web Browser

on the

Computer

. Make sure that the

Computer

is connected to the same network as the

Matrix