beautypg.com

Mounting the matrix switch, Mounting requirements – StarTech.com 4x4 HDMI Matrix Switcher with Audio and Ethernet Control (4K60) User Manual

Page 15

background image

14

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

3.

Remove the

CR 2025 Battery

and replace it with a new

CR

2025 Battery

(sold separately) with the

+

side facing up.

4.

Slide the

Battery Housing

back into the

Remote Control

,

the

Lock

will snap back into place, securing the

Battery

Housing

to the

Remote Control

.

Mounting the Matrix Switch

Note:

StarTech.com is not responsible for any damages

related to the installation of this product.

Mounting Requirements:

Server Rack x 1

Mounting Bracket x 2

Writing Utensil x 1

Phillips Head Screwdriver x 1

M5 Cage Nuts x 4

M5 Screws x 4

1.

Remove the

Mounting Screws

from the

Mounting Holes

on both sides of the

Matrix Switch

(4).

2.

Align the

Mounting Brackets

with the two

Mounting Holes

on both sides of the

Matrix Switch

.

3.

Insert the

Bracket Screws

(4) through the

Mounting

Brackets

and into the

Mounting Holes

.

4.

Tighten the

Mounting Screws

using a

Phillips Head

Screwdriver

, be careful not to over-tighten.