StarTech.com 4x4 HDMI Matrix Switcher with Audio and Ethernet Control (4K60) - Manual (Page 12)

11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Serial Control Settings
Setting Description
Baud Rate 115200bps
Data Bit 8 bits
Parity None
Flow Control None
Stop Bit 1
Using a Network to Control the Matrix Switch
To control your Matrix Switch over a network:
•
Connect an Ethernet Cable (sold separately) to the Control
Port on the Matrix Switch and to an available LAN Port on a
Network Device .
Note: See the Web Interface section for further control
instructions.
Installing the IR Receiver
Connecting the IR Receiver will extend the IR signal range on
the Matrix Switch .
•
Connect the IR Receiver to the IR IN Port on the Matrix
Switch . Face the IR Receiver in the desired direction to
receive the IR signal.