beautypg.com

Installation – StarTech.com 4x4 HDMI Matrix Switcher with Audio and Ethernet Control (4K60) User Manual

Page 10

background image

9

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Installation

1.

Connect an

HDMI Cable

(sold separately) to the

HDMI Input

Port

on the

Matrix Switch

and to an

HDMI Output Port

on

the

Video Source Device

.

Note:

If you are using a

Locking HDMI Cable

, insert and

tighten the

HDMI Cable’s Locking Screw

into the

Lock-

ing Screw Hole

above the corresponding

HDMI Port

on

the

Matrix Switch

. Using the

Phillips Head Screwdriver

,

tighten the

Locking Screw

. Be careful not to over-tighten.

2.

Connect an

HDMI Cable

to the

HDMI Output Port

on the

Matrix Switch

and the other end to an

HDMI Input Port

on

the

Display Device

. The corresponding

Input LED

(front of

Matrix Switch

)

will light up solid when a

Display Device

is

connected.

Note:

If you are using a

Locking HDMI Cable

, insert and

tighten the

Locking Screw

in the

Locking Screw Hole

above the corresponding

HDMI Port

. Using the

Phillips

Head Screwdriver

, tighten the Locking Screw. Be careful

not to over-tighten.