Sony Cyber-shot DSC-RX1R II Digital Camera User Manual

Page 29

UBP-X800 / UBP-UX80

4-687-309-

(1)

master page=right

D:\JOB\SONY

DVD\2016\SD160017\4687309111_US\070ADD.fm

dditi

onal Inf

rmati

• Delete pairing information once from the

device list and connected device, before
retrying connection.

• Connection may not be possible if other

Bluetooth devices are present around the
player. In this case, turn off the other
Bluetooth devices.

• The connection registration information has

been erased. Perform the connection
operation again.

There is no sound, the sound skips or
fluctuates, or the connection is lost.

• DVD AUDIO cannot be played via Bluetooth

device due to DRM.

• Move the Bluetooth device closer to the

player.

• Make sure the player is not receiving any

interference from a Wi-Fi network, other
Bluetooth device, other 2.4 GHz wireless
device, or microwave oven.

• Check that the Bluetooth connection is

properly made between the player and the
Bluetooth device.

• Connect the player and the Bluetooth

device again.

• Keep the player away from metal objects or

surfaces.

The [Control for HDMI] function does not
work (BRAVIA Sync).

• Check that your TV is connected via the

HDMI OUT 1 jack.

• Check that [Control for HDMI] in [HDMI

Settings] is set to [On] (page 24).

• If you change the HDMI connection, turn the

player off and on again.

• If power failure occurs, set [Control for

HDMI] in [HDMI Settings] to [Off], then set
[Control for HDMI] in [HDMI Settings] to [On]
(page 24).

• Check the following and refer to the

instruction manual supplied with the
component.

– the connected component is

compatible with the [Control for HDMI]
function.

– the connected component’s setting for

the [Control for HDMI] function is
correct.

• When you connect the player to a TV

through an AV amplifier (receiver),

– if the AV amplifier (receiver) is not

compatible with the [Control for HDMI]
function, you may be unable to control
the TV from the player.

– if you change the HDMI connection,

disconnect and reconnect the AC
power cord, or a power failure occurs,
try the following:

Switch the input

selector of the AV amplifier (receiver)
so that the picture from the player
appears on the TV screen.

Set

[Control for HDMI] in [HDMI Settings] to
[Off], then set [Control for HDMI] in
[HDMI Settings] to [On] (page 24). Refer
to the instruction manual supplied with
the AV amplifier (receiver).

The System Power-Off function does not
work (BRAVIA Sync).

• Check that [Control for HDMI] and [Linked to

TV-off] in [HDMI Settings] are set to [On] and
[Valid] (page 24).

Playback does not start from the beginning
of content.

• Press OPTIONS, and select [Play from

beginning].

Playback does not start from the resume
point where you last stopped playing.

• The resume point may be cleared from

memory depending on the disc when

– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.

Message Code 1 [Playback stopped. The
content being played is protected by
Cinavia and is not authorized for playback
on this device. For more information, see
http://www.cinavia.com. Message Code 1]
appears on the screen when playing a disc.

• The audio track of the video that you are

playing contains a Cinavia code indicating it
was intended for presentation using
professional equipment only and is not
authorized for playback by consumers
(page 36).

Control for HDMI (BRAVIA Sync)

Others