Sony Cyber-shot DSC-RX1R II Digital Camera User Manual

Page 21

UBP-X800 / UBP-UX80

4-687-309-

(1)

master page=right

D:\JOB\SONY

DVD\2016\SD160017\4687309111_US\060ADD.fm

Settings

Adjustm

nts

[Output Video Resolution]

Normally select [Auto]. Select [Original
Resolution] to output the resolution recorded
on the disc. When the resolution is lower than
the SD resolution, it is scaled up to the SD
resolution.

[24p Output]

Outputs 24p video signals only when you
connect a 24p-compatible TV via an HDMI
connection and the [Output Video
Resolution] is set to [Auto], [1080p] or [4K].

[Ultra HD Blu-ray/BD-ROM]

[Auto]: Outputs 24 Hz video signals only
when connecting a 24p-compatible TV using
the HDMI OUT jack.
[On]: Turns on the function.
[Off]: Select this when your TV is not
compatible with 24p video signals.

[DVD-ROM]

[Auto]: Outputs 24 Hz video signals only
when connecting a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.

[Data content]

This function is available for playback
contents stored in USB memory or data disc.
[Auto]: Outputs 24 Hz video signals only
when connecting a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.

[Network content]

This function is available for playback
contents from other network, such as Home
Network, Screen mirroring, etc.
[Auto]: Outputs 24 Hz video signals only
when connecting a 24p-compatible TV using
the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 24p video signals.

[4K Upscale Setting]

[Auto1]: Outputs 2K (1920 × 1080) video
signals during video playback and 4K video
signals during photo play when connecting
to a Sony 4K-compatible equipment.
Outputs 4K video signals when connecting to
a non-Sony 4K-compatible equipment.
This setting does not work for 3D video image
playback.

[Auto2]: Automatically outputs 4K video
signals when you connect a 4K-compatible
equipment.
[Off]: Turns off the function.

If your Sony equipment is not detected when
[Auto1] is selected, the setting will have the
same effect as [Auto2] setting.

[YCbCr/RGB (HDMI)]

[Auto]: Automatically detects the connected
TV type, and switches to the matching color
setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video
signals.
[RGB]: Outputs RGB video signals.

[HDMI Deep Color Output]

[Auto]: Outputs 12bit/10bit video signals
when the connected TV is compatible with
Deep Color.
[Off]: Select this when the picture is unstable
or colors appear unnatural.

[IP Content NR]

[Auto] / [Strong] / [Medium] / [Mild]: Adjust
the picture quality for Internet content.
[Off]: Turns off the function.

[3D Output Setting]

[Auto]: Normally select this.
[Off]: Select this to display all content in 2D or
to enjoy 4K output using 3D content.

[TV Screen Size Setting for 3D]

Sets the screen size of your 3D-compatible
TV.

[TV Type]

[16:9]: Select this when connecting to a wide-
screen TV or a TV with a wide mode function.
[4:3]: Select this when connecting to a 4:3
screen TV without a wide mode function.

[Screen Format]

[Full]: Select this when connecting to a TV
with a wide mode function. Displays a 4:3
screen picture in 16:9 aspect ratio even on a
wide-screen TV.
[Normal]: Changes the picture size to fit the
screen size with the original picture aspect
ratio.