Sony Cyber-shot DSC-RX1R II Digital Camera - Manual (Page 22)

22
UBP-X800 / UBP-UX80
4-687-309- 11 (1)
master page=left D:\JOB\SONY
DVD\2016\SD160017\4687309111_US\060ADD.fm
x [DVD Aspect Ratio]
[Letter Box]: Displays a wide picture with
black bands on the top and bottom.
[Pan & Scan]: Displays a full-height picture on
the entire screen, with trimmed sides.
x [Cinema Conversion Mode]
[Auto]: Normally select this. The player
automatically detects whether the material is
video-based or film-based, and switches to
the appropriate conversion method.
[Video]: The conversion method suited for
video-based material will always be selected
regardless of the material.
x [Pause Mode]
[Auto]: Normally select this. Dynamic moving
pictures appear without blurring.
[Frame]: Displays static pictures at high
resolution.
[Audio Settings]
x [Digital Audio Output]
[Auto]: Normally select this. Outputs audio
signals according to the status of the
connected devices.
[PCM]: Outputs PCM signals from the DIGITAL
OUT (COAXIAL)/HDMI OUT jack. Select this if
there is no output from the connected device.
b
This function is disabled during connection with
a Bluetooth device. Audio format may be
changed during Bluetooth connection.
x [DSD Output Mode]
[Auto]: Outputs DSD signal from HDMI OUT
jack when playing Super Audio CD & DSD
format file (if the connected device also
supports DSD).
Outputs LPCM signal from HDMI OUT jack
when playing Super Audio CD & DSD format
file (if the connected device does not support
DSD).
[Off]: Outputs PCM signals from HDMI OUT
jack when playing Super Audio CD and DSD
format file.
b
This function is disabled during connection with
a Bluetooth device. Audio format may be
changed during Bluetooth connection.
x [BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing
the interactive and secondary audio to the
primary audio.
[Off]: Outputs the primary audio only. Select
this to output Bitstream (Dolby/DTS) signals
to an AV amplifier (receiver).
z
To enjoy Bitstream (Dolby/DTS) signals, set [BD
Audio MIX Setting] to [Off] and [Digital Audio
Output] to [Auto].
x [DTS Neo:6]
[Cinema]/[Music]: Outputs the simulated
multi-channel sound from 2 channel sources
via the HDMI OUT jack according to the
capability of the connected device using
[Cinema]/[Music] mode.
[Off]: Outputs the sound with its original
number of channels via the HDMI OUT jack.
b
When [DTS Neo:6] is set to [Cinema] or [Music],
[DSEE HX] cannot be set to [On].
x [48kHz/96kHz/192kHz PCM]
[48kHz]/[96kHz]/[192kHz]: Sets the sampling
frequency for the PCM signals output from
the DIGITAL OUT (COAXIAL) jack.
b
Some device does not support [96kHz] and
[192kHz] sampling frequency.
x [DSEE HX]
[On]: Upscales the audio file to a High-
Resolution Audio file and reproduces the
clear high-range sound which is often lost.
[Off]: Turns off the function.
b
Source must be 2ch and 44.1/48 kHz.
x [Audio DRC]
[Auto]: Performs playback at the dynamic
range specified by the disc (BD-ROM only).
Other discs are played back at the [On] level.
[On]: Performs playback at a standard
compression level.
[Off]: No compression works. A more
dynamic sound is produced.