Echo PRO ATTACHMENT SERIES PAS-225 User Manual
Page 9
P
ro
A
ttAchment
S
erieS
tm
o
PerAtor
'
S
m
AnuAl
9
C
ontents
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions,
other assembly may be necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
_____ 1 - Power Head w/Upper Drive Shaft Assembly
_____ 1 - Operator's Manual
_____ 1 - Safety Manual
_____ 1 - Emission Control Warranty Statement
_____ 1 - Warranty Registration Card
_____ 1 - Safety Glasses
_____ 1 - Echo Power BlendX
TM
2-stroke oil sample
_____ 1 - Assembly Tool (s)
Pro Attachment Series
TM
Operator's Manual
MODEL
PAS-225 Value Pack
WARNING
Read rules for safe operation and instructions carefully. ECHO provides an Oper-
ator's Manual with this unit and a separate Operator's Manual and Safety Manual
(if available) with the attachment. All manuals must be read and understood for
proper and safe operation. Failure to do so could result in serious injury.
X7722273900
X772000380
01/10
a
ssembly
power
head
shaft
/
lower
shaft
assembly
d
A
B
Parts Required: Trimmer or Power Edger Attachment Assembly
1. Set Power Head/Shaft Assembly on a level surface.
2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock-
out position.
3. Remove vinyl cap from attachment drive shaft.
4. Remove cardboard spacer, if necessary.