Echo PRO ATTACHMENT SERIES PAS-225 User Manual

Page 10

5. Carefully fit attachment drive shaft assembly into coupler (B) to

decal assembly line (C), making sure that the inner lower drive shaft

engages the square upper drive shaft socket.

NOTE

Lower bearing housing and head assembly must be in line with the

engine.

6. Rotate locator pin (A) 1/4 turn clockwise to engage lower shaft

hole. Insure locator pin is fully engaged by twisting lower drive

shaft. Locator pin should snap flush in coupler. Full engagement

will prevent further shaft rotation.

7. Secure lower shaft assembly to coupler by tightening clamping

knob (D).

Min

SPAcing

front

handle

InstallatIon

NOTE

Label shows minimum spacing for front handle location.

1. Position front handle for comfortable operation and secure screws.