Roland V-02HD MK II Multi-Format Video Mixer with Streaming - Manual (Page 5)

5
Operating Guide (Panel Descriptions)
INPUT 1, 2 connectors
[PHONES] knob
Adjusts the volume of
the headphones.
AUDIO IN jack (stereo mini)
This inputs audio. Connect this to your audio or video
device such as an audio mixer or CD player.
* Do not block the ventilation openings (the slits located on the front and side panels, etc.). If the ventilation openings
are blocked, the internal temperatures may rise, causing malfunctions due to excessive heat.
9 Turning the Power On/Off
[POWER] switch
* Before turning the unit on/off, always be sure to turn the
volume down. Even with the volume turned down, you might
hear some sound when switching the unit on/off. However, this
is normal and does not indicate a malfunction.
Turning the power on
1.
Make sure that all devices are powered-off.
2.
Turn on the V-02HD’s [POWER] switch.
3.
Turn on the power in the order of source devices 0
output devices.
Turning the power off
1.
Turn off the power in the order of output devices 0
source devices.
2.
Turn off the V-02HD’s [POWER] switch.
About the Auto Off function
The power to the V-02HD turns off automatically when all
of the following states persist for 240 minutes (Auto Off
function).
5 No operation performed on the V-02HD
5 No audio or video input
5 No equipment is connected to the PROGRAM OUT/
PREVIEW OUT connectors
If you do not want the power to be turned off
automatically, disengage the Auto Off function. Press the
[MENU] button 0 “SYSTEM” 0 set “AUTO OFF” to “OFF.”
* Unsaved data is lost when the power turns off. Before
turning the power off, save the data that you want to keep.
* To restore power, turn the power on again.
These input video. Connect these to a video
camera, video device such as a BD player, or
a computer that is equipped with an HDMI
output connector.
Audio output
connectors
HDMI output
connector
PHONES ( Q ) jack
(stereo mini)
Connect headphones
here.
Rear Panel/Side Panel (Connecting Your Equipment)
HDMI cable