Roland Aerophone Mini Digital Wind Instrument - Manual (Page 5)

5 5
Before You Play
3 .
Set the power select switch to “USB.”
* Use only the included power supply USB cable. When connecting or
disconnecting the cable, grasp the plug itself; do not pull the cable.
* Handle USB cables with care. If saliva drips down the USB cable and reaches
the interior of the USB AC adaptor, malfunctions or electrical shock might
occur.
Step 2
Turning the Aerophone mini On
Set the [
L
] switch to “ON.” If you want to use Bluetooth functionality, set it
to the “ ” position.
[
L
] switch
Power LED
Bluetooth LED
NOTE
The sensitivity of the mouthpiece is automatically adjusted when you
turn on the power (this unit takes about seven seconds for the system to
start). For this reason, don’t bite or touch the mouthpiece while turning
on the [
L
] switch.
* The power LED indicates whether power is on or off.
* When you turn the power switch “OFF,” the power LED blinks and the shutdown
process occurs. Do not remove the batteries or disconnect the USB AC adaptor
until the LED goes dark.
* The power to this unit will be turned off automatically after a predetermined
amount of time has passed since it was last used for playing music, or its
buttons or controls were operated (Auto Off function). To prevent the power
from turning off automatically, make settings in the app to disable the Auto Off
function. To turn the power on again, set the [
L
] switch to the “OFF” position,
and then move it back to the “ON” position.
Step 3
Wrapping the Band
If you continue playing for an extended time, saliva from
your mouth might drip down across the instrument and
enter the interior from around the [
L
] switch or any keys.
When playing the instrument, wrap the included band
around it as shown in the illustration.