Roland GO:MIXER PRO-X Audio Mixer for Smartphones - Manual (Page 3)

1.
Connect the instrument, mic, or audio
player etc. that you want to record to
the GO:MIXER PRO-X.
2.
Connect the included USB cable first to
the GO:MIXER PRO-X and then to your
smartphone (p. 6).
* If you are unable to record on your smartphone,
slowly repeat step 2 once again.
* To prevent malfunction and equipment failure,
always turn down the volume, and turn off all
the units before making any connections.
* Before turning the unit on/off, always be sure to
turn the volume down. Even with the volume
turned down, you might hear some sound
when switching the unit on/off. However, this is
normal and does not indicate a malfunction.
* If operating on batteries, the POWER indicator
blinks when the batteries run low. If you
continue using the unit in this state, the power
automatically turns off after approximately one
minute. Replace the battery as soon as possible.
* In some cases, noise might be heard when you
connect a smartphone, or when you start up or
operate an app.
* The POWER indicator may flash twice when you
connect your smartphone if the smartphone’s
batteries have degraded. This is not a
malfunction.
3