Roland AeroCaster Livestreaming System - Manual (Page 25)

Audio Operations
25
Removing Noise from an Audio Signal (Noise Gate)
A noise gate is used to remove the sound of hissing noises that you may hear during silence.
Follow the steps below to switch the noise gate on/off.
When you launch the VRC-01, the noise gate is always set to “on”, regardless of the noise gate’s on/off settings.
1. You can press the ASSIGNABLE DECK [1] button to switch the noise gate on/off while long-pressing the
[USER] button.
The ASSIGNABLE DECK [1]–[6] buttons blink when you are able to make the noise gate setting.
The color of the light on the ASSIGNABLE DECK [1] button indicates whether the noise gate is on or off.
Lit red On
Lit green Off
2. Take your finger off the [USER] button.