Audio operations, Adjusting the input gain (sensitivity) – Roland AeroCaster Livestreaming System User Manual
Page 22
Audio Operations
22
Audio Operations
This section explains about the audio-related operations for this unit.
Adjusting the Input Gain (Sensitivity)(P.22)
Adjusting the Volume Balance(P.24)
Removing Noise from an Audio Signal (Noise Gate)(P.25)
Adjusting the Input Gain (Sensitivity)
Adjust the input gain of MIC 1 or MIC 2 so that the audio input is at an appropriate level.
1.
Move the [MIC 1] or [MIC 2] fader to a position near the thick lines on the level scale.
2.
Move the [MAIN] fader to a position near the thick lines on the level scale.
3.
Turn the [MIC 1] or [MIC 2] knob fully counter-clockwise, minimizing the input gain.
4.
While producing the sound that is actually going to be input, slowly turn the [MIC 1] or [MIC 2] knob
clockwise to adjust the input gain.
Raise the input gain as high as possible without letting the SIG/PEAK indicator for MIC 1 or MIC 2 light up red at the loudest
sound level.