Samsung SmartTag2 Wireless Tracker (White) - Manual (Page 23)

Appendix
23
Another Bluetooth device cannot locate your product
•
Ensure that the device you wish to connect with is ready to be scanned or connected
to.
•
The location of the product is based on the GPS and Wi-Fi positioning results of
the device connected to the product, and some problems may occur because of the
surrounding environment or GPS failure. Make sure that the device you want to
connect to your product is nearby.
•
Reset your product and try again.
If these tips do not solve the problem, contact a Samsung Service Centre or an
authorised service centre.
You cannot find your product’s current location
GPS signals may be obstructed in some locations, such as indoors. Set the mobile device
connected to the product to use Wi-Fi or a mobile network to find the current location in
these situations.
A small gap appears around the outside of the product
•
This gap is a necessary manufacturing feature and some minor rocking or vibration
of parts may occur.
•
Over time, friction between parts may cause this gap to expand slightly.
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this device that are not
expressly approved by the manufacturer may void the user’s authority to operate the
equipment.
23
English
21