Pc/av mode, Source detection, Key repeat time – Samsung ViewFinity UR50 28" 16:9 4K HDR FreeSync IPS Monitor User Manual
Page 36: Power led on, Reset all, Pc/av mode 36, Source detection 36, Key repeat time 36, Power led on 36, Reset all 36
36
PC/AV Mode
Set
PC/AV Mode
to
AV
. The picture size will be enlarged.
This option is useful when you view a movie.
•
Set to
PC
when connected to a PC.
•
Set to
AV
when connected to an AV device.
―
Products with a display area of 16:9 or 16:10 are only supported.
―
If the product is in
HDMI
,
DisplayPort
mode and the screen says
Check the cable connection and the
settings of the source device.
press the JOG button to display the Function Key Guide screen and then
select
→
System
→
PC/AV Mode
→
HDMI
,
DisplayPort
→
PC
or
AV
.
Source Detection
Select either
Auto
or
Manual
as the method to recognise input source.
―
Not available when
PIP/PBP Mode
is set to
On
.
Key Repeat Time
Control the response rate of a button when the button is pressed.
Acceleration
,
1 sec
, or
2 sec
can be selected. If
No Repeat
is selected, a command responds only once
when a button is pressed.
Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
•
Working
: The power LED is on when the product is turned on.
•
Stand-by
: The power LED is on when the product is turned off.
Reset All
Return all the settings for the product to the default factory settings.