Samsung ViewFinity UR50 28" 16:9 4K HDR FreeSync IPS Monitor - Manual (Page 20)

20
Connection Using an HDMI-DVI Cable
First make sure that the power cables for product and other devices (e.g. PC, settop box, etc.)
are removed.
HDMI IN 1, HDMI IN 2
―
The audio function is not supported if the source device is connected using the HDMI-DVI cable.
―
The optimum resolution may not be available with an HDMI-DVI cable.
Connection Using an DP Cable
First make sure that the power cables for product and other devices (e.g. PC, settop box, etc.)
are removed.
DP IN
―
A DP cable shorter under 1.5 m in length is recommended. Using a cable longer than 1.5 m can affect the
picture quality.
Connecting to headphones or earphones
―
Use headphones or earphones when activating sound with an HDMI-HDMI or DP cable.
―
The headphones or earphones jack supports only the 3 conductor tip-ring-sleeve (TRS) type.
Connecting the Power
1
3
HDMI IN 1 HDMI IN 2 DP IN SERVICE DC 19V
HDMI IN 1 HDMI IN 2 DP IN DC 19V SERVICE
2
1 Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 19V
port on the back of the product.
2 Next, connect the power cable to the power outlet.
3 Press the JOG button at the bottom of the product to turn it on.
―
The input voltage is switched automatically.