Removing the stand – Samsung ViewFinity UR50 28" 16:9 4K HDR FreeSync IPS Monitor User Manual
Page 18
18
Removing the Stand
―
Before removing the stand from the product, place the product on a flat and stable surface with the screen
facing down.
Caution
Do not hold the product upside down only by the
stand.
Caution
Do not press down on the product. There is a risk
of damaging the product.
1
2
3
4
Place the protective Styrofoam (cushion)
included in the package on the floor and place
the product facing down on the Styrofoam, as
shown in the image. If Styrofoam is unavailable,
use a thick sitting mat.
To disassemble the stand from the monitor, be
sure to press the lower part of the monitor with
one hand, and shake the stand from side to side
with the other hand to make some gap between
them.
Press the lower part of the monitor with one
hand, and pull the stand with the other hand in
the direction of the arrow as shown in the figure.
Remove the stand neck from the stand base
by turning the screw in the arrow direction as
shown in the figure.