GRAM KF 482064 FN/1 - Manual (Page 62)

EN
61
THE VARIOUS FUNCTION AND POSSIBILITIES
• The temperature value selected before activating the super cooling
mode or eco mode will remain the same once this mode has been
completed or cancelled. The appliance will go on operating at these
set temperature values.
Freezer temperature settings
• First of all, press the segment select button and select freezer
segment.
• Press the fridge temperature up or down setting button.
• Each press on temperature setting down button will set the value
to a lower degree: (-16, -18, -20, -22, -24°C and Super Freeze)
• Each press on temperature setting up button will set the value to
a upper degree: (Super Freeze, -24, -22, -20, -18, -16 °C)
• The temperature value selected before activating the super freeze
mode or eco mode will remain the same once this mode has been
completed or cancelled. The appliance will go on operating at these
set temperature values.
Warnings about Temperature Adjustments
• Temperature adjustments should be made according to the
frequency of door openings and the quantity of food kept inside the
fridge.
• Do not pass to another adjustment before completing an adjustment.
• Your fridge should be operated up to 24 hours according to the
ambient temperature without interruption after being plugged in to
be completely cooled. Do not open doors of your fridge frequently
and do not place much food inside it in this period.
• A 5 minute delaying function is applied to prevent damage to the
compressor of your fridge, when you take the plug off and then plug
it on again to operate it or when an energy breakdown occurs. Your
fridge will start to operate normally after 5 minutes.
• Your fridge is designed to operate in the ambient temperature
intervals stated in the standards, according to the climate class
stated in the information label. We do not recommend operating
Door Open Alarm Function
If fridge door is opened more than 2 minutes, appliance sounds ‘beep
beep’.