Roborock S4 Max - Manual (Page 24)

23
Instructions for use
Selective Room Cleaning
Select specific rooms for cleaning in the app. In this mode, the
robot will only clean the selected rooms.
Scheduled Cleaning
Use the app to set start times for scheduled cleanups.
The robot will return to the charging dock after each cleanup.
Note:
• A full map must be created and Map Saving mode switched on before this function
can be used.
• After cleaning starts, the robot may move beyond the defined areas. Make sure
there are no obstacles preventing the robot’s access to the target rooms.
Note:
While cleaning the designated zone, the robot may move outside zone borders.
Make sure that there are no cables or obstacles placed close to the cleanup zone.
Zone Cleaning
Use the app to draw a specific zone for the robot to clean.
Pin n Go
Use the app to set a destination for the robot to go to.
Cleaning mode
Use the app to choose from Quiet, Balanced, Strong, or MAX
modes. The Balanced mode is the default.
Do Not Disturb (DND) mode
In DND mode, no cleanups will start, no voice alerts will play, and
the power indicator will dim. DND Mode is set from 22:00 to 08:00
by default and can be disabled or modified in the app.
A
C
D
B