FujiFilm X-T1 - Manual (Page 71)

55
M
o
re
o
n
Ph
o
to
g
ra
p
h
y a
n
d Pl
a
y
b
a
ck
The DRIVE Dial
2 Select one of the following options using a function button ( P 40; at default settings, bracketing
program selection is assigned to the Fn1 button) or the shooting menu ( P 77).
Option Option Description Description
AE BKT AE BKT
Select a bracketing amount. Each time the shutter button is pressed, the camera will take three shots:
one using the metered value for exposure, the second overexposed by the selected amount, and the third
underexposed by the same amount (regardless of the amount selected, exposure will not exceed the limits
of the exposure metering system).
ISO BKT ISO BKT
Select a bracketing amount. Each time the shutter is released, the camera will take a picture at the current
sensitivity (
P 50) and process it to create two additional copies, one with sensitivity raised and the other
with sensitivity lowered by the selected amount (regardless of the amount selected, sensitivity will not
exceed ISO 6400 or fall below ISO 200).
FILM SIMULATION FILM SIMULATION
BKT
BKT
Select a bracketing type. Each time the shutter is released, the camera takes one shot and processes it to
create copies with the selected fi lm simulation settings (
P 42).
DYNAMIC RANGE DYNAMIC RANGE
BKT
BKT
Each time the shutter button is pressed, the camera takes three shots with diff erent dynamic ranges ( P 79):
100% for the fi rst, 200% for the second, and 400% for the third. While dynamic range bracketing is in eff ect,
sensitivity will be restricted to a minimum of ISO 800; the sensitivity previously in eff ect is restored when
bracketing ends.
WHITE BALANCE WHITE BALANCE
BKT
BKT
Select a bracketing amount. Each time the shutter button is pressed, the camera takes three shots: one at
the current white balanced setting, one with fi ne-tuning increased by the selected amount, and another
with fi ne-tuning decreased by the selected amount.
3 Take photographs.