FujiFilm X-T1 User Manual

Page 60

Default Roles

: Custom White Balance

Choose

to adjust white balance for unusual lighting conditions. White balance measurement options will

be displayed; frame a white object so that it fi lls the display and press the shutter button all the way down to
measure white balance (to select the most recent custom value and exit without measuring white balance,
press DISP/BACK, or press MENU/OK to select the most recent value and display the fi ne-tuning dialog).
• If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.
• If “UNDER” is displayed, raise exposure compensation (

52) and try again.

• If “OVER” is displayed, lower exposure compensation (

52) and try again.

k: Color Temperature

: Color Temperature

Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K). Light sources
with a color temperature close to that of direct sunlight appear white; light sources with a lower color tempera-
ture have a yellow or red cast, while those with a higher color temperature are tinged with blue. You can match
color temperature to the light source as shown in the following table, or choose options that diff er sharply from
the color of the light source to make pictures “warmer” or “colder.”

Choose for redder light sources
or “colder” pictures

Choose for bluer light sources

or “warmer” pictures

2,000 K
Candlelight

5,000 K

Direct sunlight

15,000 K

Blue sky

Sunset/sunrise

Shade