FujiFilm X-T1 - Manual (Page 28)

12
Attaching a Lens Attaching a Lens
Lenses attach as described below.
Q Care is required to prevent dust entering the camera while attaching and removing lenses.
1 Remove the body and rear caps.
Remove the body cap from the camera and
the rear cap from the lens.
Q Do not touch the camera’s internal parts.
2 Attach the lens.
Place the lens on mount, keeping the marks
on the lens and camera aligned, and then ro-
tate the lens until it clicks into place.
Q Do not press the lens release button while at-
taching the lens.
Removing Lenses Removing Lenses
To remove the lens, turn the
camera off , then press the lens
release button and rotate the
lens as shown.
Lens release button
Q To prevent dust accumulating on the lens or inside the
camera, replace the lens caps and camera body cap
when the lens is not attached.
Lenses and Other Optional Accessories Lenses and Other Optional Accessories
The camera can be used with lenses for the FUJIFILM
X-mount and the other accessories listed from page
109.