Canon EOS 1D X Mark II - Manual (Page 91)

91
Responding to Error Messages
What to check on the camera
On the camera, DNS address is set to [Manual setting]. Is this
the correct setting?
X If no DNS server is used, set the camera’s DNS address setting to
[Disable] (p.106).
On the camera, does the DNS server’s IP address setting
match the server’s actual address?
X On the camera, set the IP address that matches the address of the
DNS server used (p.101, 106).
What to check on the DNS server
Is the power of the DNS server on?
X Turn on the DNS server.
Are the DNS server settings for IP addresses and the
corresponding names correct?
X On the DNS server, make sure IP addresses and the
corresponding names are entered correctly.
Is the DNS server working correctly?
X Check the DNS server settings to make sure the server is working
correctly as a DNS server.
X If applicable, ask your network administrator to ensure that the
DNS server is available.
What to check on the network as a whole
Does your network include a router or similar device that
serves as a gateway?
X If applicable, ask your network administrator for the network
gateway address and enter it on the camera (p.101, 106).
X Make sure that the gateway address setting is correctly entered on
all network devices, including the camera.
22: No response from DNS server