Canon PowerShot SX410 IS - Manual (Page 7)

7
Trying the Camera Out Trying the Camera Out
Shooting
For fully automatic selection of the optimal settings for specifi c scenes,
simply let the camera determine the subject and shooting conditions.
1 Turn the camera on and enter
[ ] mode.
  Press the ON/OFF button.
  Press the [ ] button several times
until [ ] is displayed.
2 Compose the shot.
  To zoom in and enlarge the subject, move
the zoom lever toward [
i] (telephoto) as
you watch the screen, and to zoom away
from the subject, move it toward [
j]
(wide angle).
3 Shoot.
Shooting Still Images
  Press the shutter button lightly (1).
  The camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus. Press the shutter
button all the way down (2).
  If [Raise the fl ash] is displayed, lift the
fl ash with your fi nger to prepare it for use.
If you prefer not to use the fl ash, push it
down with your fi nger, into the camera.
Shooting Movies
  Press the movie button to start shooting,
and press it again to stop.
(1) (2)