Canon PowerShot SX410 IS - Manual (Page 3)

3
Manuals and Software Manuals and Software
You can download manuals and software from the following
URL.
http://www.canon.com/icpd/
• With a computer connected to the Internet, access the above URL.
• Access the site for your country or region.
• Adobe Reader is required to view the manuals.
• You can also download software from the website. For instructions on
downloading and installing the software, refer to the Camera User Guide
available for download.
Initial Preparations Initial Preparations
Charging the Battery Pack
1 Insert the battery pack.
  After aligning the  marks on the battery
pack and charger, insert the battery pack
by pushing it in (1) and down (2).
2 Charge the battery pack.
  Plug the power cord into the charger, then
plug the other end into a power outlet.
  The charging lamp turns orange, and
charging begins.
  When charging is fi nished, the lamp turns
green. Remove the battery pack.
  For details on charging time and the
number of shots or recording time available
with a fully charged battery pack, refer
to “Specifi cations” in the downloadable
Camera User Guide.
(1)
(2)