ProSoft Technology RLXIB-IHN-W-E - Manual (Page 80)

RadioLinx Configuration Manager RLXIB-IHN-WC ♦ 802.11n
User Manual Weatherproof Industrial Hotspot
Page 80 of 80 ProSoft Technology, Inc.
July 9, 2012
2.3 Diagnostics
The Main Diagnostics tab shows basic information about the radio.
Parameter Description
Unit Up Time The length of time the radio has operated since the last system power-
up or last system reset.
Firmware The version of firmware currently installed. All radios on the network
must have the same firmware versions installed. For more information
on firmware versions, refer to Upload Code (page 96).
2.3.1 Radio Status
Parameter Description
MAC ID The MAC address of the selected radio. The MAC ID is also printed on
the side of the radio.
Link Status Master: The radio is configured as a Master.
Connected: The radio is currently connected to a Parent
Associated: The radio is associated with a Parent, but is not
currently connected
Connecting: The radio is attempting to connect to a Parent
Disconnected: The radio is unable to connect to a Parent
Parent The MAC address of the parent radio to which the selected radio is
linked.
Link Time The length of time the radio has been continuously connected to a
parent radio.
RSSI Strength of the signal from the Parent radio, in dBm.
SNR The signal-to-noise ratio is displayed here in dB. Refer to
Understanding Signal to Noise Ratio (page 133) for more information
on how to interpret this value.
Poll Interval Enter the interval in seconds to refresh the status information on this
page.
Start Click to start refreshing the page.
Stop Click to stop refreshing the page.