ProSoft Technology RLXIB-IHN-W-E - Manual (Page 56)

RadioLinx Configuration Manager RLXIB-IHN-WC ♦ 802.11n
User Manual Weatherproof Industrial Hotspot
Page 56 of 56 ProSoft Technology, Inc.
July 9, 2012
Configured Security Servers
To use Security Server authentication, you must add one or more RADIUS
servers to the list. To add a server, click the Add button, and enter the server
information.
Parameter Description
Authentication Server IP
Address IP address on the network where the RADIUS server is located.
Authentication Port The most commonly used authentication ports for RADIUS are 1812
(the default for Microsoft RADIUS server), or 1645 (legacy, the default
for Cisco and Juniper Networks RADIUS servers).
Other configurations are possible. Refer to the documentation for your
RADIUS server to determine the UDP port number to use (0 to 65535).
Secret Enter the Shared Secret for this RADIUS client (the RLXIB-IHN-W
radio). Obtain this information from the administrator for the RADIUS
server.
Timeout The time in seconds for an authentication attempt to time out after no
response from the server. The value in seconds should be between 5
and 999.
Retries This field sets the number of times to retry authentication with this
server after a timeout before the authentication attempt fails. This value
should be between 1 and 999.
Select All Selects all configured security servers in the list
Delete Deletes the selected configured security servers from the list
Add Opens the Security Server Configuration page.
The following illustration shows a security server configured for RADIUS
authentication (Port 1645).