ProSoft Technology RLXIB-IHN-W-E - Manual (Page 4)

Recommended Antennas
Part Number Max
Gain Part number Max gain Part Number Max gain
A2503S6-O 3 dBi A2406S3-DP 6 dBi A5017NJ3-DP 17 dBi
A2408NJ-DP 8 dBi A2419NJ-DP 19 dBi A5024NJ-DP 24 dBi
A2506NJ6-0 6 dBi A2503S6-O 3 dBi A2413NJ3-DP 12 dBi
A5812NJ-OC 12 dBi A2415NJ-OC 15 dBi A082503-80-OBH 3 dBi
A2402S-OS 2 dBi A2402S-OSLP 2 dBi A2403NBH-OC 3 dBi
A2404NBHW-OC 4 dBi A2404NJ-OC 4 dBi A2405S-OA 5 dBi
A2405S-OM 5 dBi A2405S-OS 5 dBi A2406NJ-OC 6 dBi
A2406NJ-OCD 6 dBi A2408NJ-OC 8 dBi A2409NJ-OCD 9 dBi
A2502S-OA 2 dBi A2504S-OA 4 dBi A2506NJ-OC 6 dBi
A5003S-OBH 3 dBi A5006NJ-OC 6 dBi A5009NJ-OC 9 dBi
A2508NJ-DP 8 dBi A2413NJ-DP 13 dBi A2416NJ-DS 16 dBi
A5019NJ-DP 19 dBi A2419NJ-DB 19 dBi A2424NJ-DB 24 dBi
A5829NJ-DB 29 dBi A2410NJ-DY 10 dBi A2415NJ-DY 15 dBi
An adapter may be needed for some of the listed antennas to operate with the specified radio
Antenna spacing requirements for user safety
It is important to keep the radio's antenna a safe distance from the user. To meet the requirements of FCC part
2.1091 for radio frequency radiation exposure, this radio must be used in such a way as to guarantee at least 20 cm
between the antenna and users. Greater distances are required for high-gain antennas. The FCC requires a
minimum distance of 1 mW *cm2 power density from the user (or 20 cm, whichever is greater).
If a specific application requires proximity of less than 20 cm, the application must be approved through the FCC for
compliance to part 2.1093.