ProSoft Technology AN-X-PB - Manual (Page 55)

AN-X-PBCAPT Page 51
Using the Web Interface
The AN-X module contains a webserver capable of communicating with
standard web browsers such as Internet Explorer.
The web interface is used for viewing AN-X logs.
To use the web interface, you need to know the IP address of the AN-X.
Run AnxInit and use the Utilities/Locate All AN-X Devices command to
find all AN-X devices on the Ethernet network.
To access the web interface, start your web browser and type the AN-X
IP address where you normally enter web addresses in the browser.
Log Files
AN-X maintains various logs to record diagnostic and error messages.
Use the Utilities menu in the web interface to view these logs.
System Error Log
The System Error log records errors that occur during AN-X operation.
This log is normally empty.
System Info Log
The System Info Log records informational messages during startup and
normal operation.
View All Logs
Use View All Logs to list and view all the AN-X logs. To view a log
file, double click on the file name.
Administration Menu
The Administration Menu is used to view and edit files on AN-X. It is
password protected and is used only for AN-X technical support.