ProSoft Technology AN-X-PB - Manual (Page 31)

AN-X-PBCAPT Page 27
Name Value Description
RFDL 0x49 Cmd: Request FDL Status (check for node presence)
MDLY 0x4a Cmd: Station Management Send and Request Data
Slot Delay
MKEP 0x4b Cmd: Station Management Send and Request Data
Slot Keep
SRDL 0x4c Cmd: Send and Request Data (Low Priority)
SRDH 0x4d Cmd: Send and Request Data (High Priority)
RIR 0x4e Cmd: Request Ident with Reply
RLSR 0x4f Cmd: Request LSAP Status with Reply
OK 0x00 Rsp: OK
UE 0x01 Rsp: User Error
RR 0x02 Rsp: No Resource for Send Data
RS 0x03 Rsp: No Service Activated
DL 0x08 Rsp: Ok with Data (Low Priority)
NR 0x09 Rsp: No Response
DH 0x0a Rsp: Ok with Data (High Priority)
RDL 0x0c Rsp: No Resource for Send Data, with Data (Low
Priority)
RDH 0x0d Rsp: No Resource for Send Data, with Data (High
Priority)
MTM2 0xc0 Cmd: Station Management Time 2
Example: Frames showing various frame control values:
144: a11.003,225,638 125<0 SRDH 00
145: a11.003,248,060 0<125 DL 00
146: a11.003,277,602 107<0 RFDL
147: a11.003,291,394 0<107 OK
148: a11.003,313,066 0<0
149: a11.003,328,733 108<0 RFDL
150: a11.003,343,524 0<108 OK
151: a11.003,364,566 0<0
152: a11.003,381,530 1<0 SRDH 00
153: a11.003,404,488 0<1 DL 00