ProSoft Technology AN-X-AMX - Manual (Page 28)

Page 24 AN-X-DCSNet2 November 2011
Enter the Name. Use the host name you assigned to AN-X when you
configured its IP properties.
Set the Slot to 16 and the chassis size to 17.
Set the Comm Format to None.
Set the IP address to match the AN-X module.
Set Electronic Keying to Disable Keying.
Click OK to accept the settings
2. Add Generic modules for each scheduled connection. Right click on
the backplane and select New Module. From the Other category,
select 1756-MODULE.