ProSoft Technology AN-X-AMX - Manual (Page 24)

Page 20 AN-X-DCSNet2 November 2011
3. Set the Communications Type to PC Link Interface Module.
4. Set the Drop to match the AN-X drop number on DCS
5. Set the Segment to match the Memory Address in the VDD
Configuration.
6. Set the Port Addr to match the Port Address in the VDD
configuration.
7. Click OK to complete the configuration.
You should now be able to go online with the AutoMax Programming
Executive.
Multiple Programmer Access
The AutoMax operating system uses the source of programming
messages (direct connection to the serial port or drop number on
DCSNet) to distinguish between programmers. It uses the identity of
each programmer to manage levels of access (None, Data, Task) and to
return requests for data to the programming devices. The AutoMax
operating system controls the operations that programming device can
perform, depending on their access level.