ProSoft Technology MVI69L-MBS - Manual (Page 84)

Using Controller Tags MVI69L-MBS ♦ CompactLogix Platform
User Manual Communication Module
Page 84 of 154 ProSoft Technology, Inc.
January 6, 2014
5.4.3.3 MBS.CONTROL.EventCmd_DBData
This array allows the processor to dynamically build Modbus commands (for
periodic use) with data associated to the MBS database.
Tag Name Range Description
MBS.CONTROL.EventCmd_DBData.
EventCmdTrigger 0 or 1 Toggle to send Event Command.
0 = Disable, 1 = Enable
MBS.CONTROL.EventCmd_DBData.
PortNumber 1 Port number to be associated with
command Control function
MBS.CONTROL.EventCmd_DBData.
SlaveID 1 to 248 Slave ID of Modbus slave
MBS.CONTROL.EventCmd_DBData.
InternalDBAddress
0 to 479 or
0 to 3839
(bit-level)
Used only if UseModuleDBAddress=1.
Allowable range is 0 to 479 for Modbus
Function Codes 3, 4, 6, or 16, and 0 to
3839 for Function Codes 1, 2, 5, or 15.
MBS.CONTROL.EventCmd_DBData.
PointCount 0 to 125 Number of bit/words associated with this
command.
MBS.CONTROL.EventCmd_DBData.
SwapCode 0 to 3 Swap code 0 = no swap, 1 = word swap, 2
= words & byte swap, 3 = byte swap
MBS.CONTROL.EventCmd_DBData.
ModbusFunctionCode - Modbus function code (1,2,3,4,5,6,15,or
16)
MBS.CONTROL.EventCmd_DBData.
DeviceDBAddress 0 to 9999 Modbus address of the target slave
database
MBS.CONTROL.EventCmd_DBData.
EventCmdStatusReturned - Event status returned by the module
5.4.3.4 MBS.CONTROL.EventCmd_ProcessorData
This array allows the processor to dynamically build Modbus commands (for
periodic use) with processor data.
Tag Name Range Description
MBS.CONTROL.EventCmd_ProcessorData.
CmdTrigger 0 or 1 Toggle to send Event Command.
0 = Disable, 1 = Enable
MBS.CONTROL.EventCmd_ProcessorData.
GetStatusTrigger 0 or 1 Toggle to retrieve event status.
0 = Disable, 1 = Enable
MBS.CONTROL.EventCmd_ProcessorData.
PortNumber 1 Port number to be associated with
command
MBS.CONTROL.EventCmd_ProcessorData.
SlaveAddress 1 to 248 Slave ID of Modbus slave
MBS.CONTROL.EventCmd_ProcessorData.
ModbusFunctionCode - Modbus function code (5,6,15,or 16)
MBS.CONTROL.EventCmd_ProcessorData.
DeviceDBAddress 0 to
9999 Modbus address of the target slave
database
MBS.CONTROL.EventCmd_ProcessorData.
PointCount 0 to 125 Number of bit/words associated with
this command.
MBS.CONTROL.EventCmd_ProcessorData.
Data[x] 0 to 49 Data values to be sent to the slave
MBS.CONTROL.EventCmd_ProcessorData.
EventCmdStatusReturned - Command status
MBS.CONTROL.EventCmd_ProcessorData.
Port1Status - Port 1 Status array
MBS.CONTROL.EventCmd_ProcessorData.
Port1Status.Status - Status code (Check error code listings
on page 101)
MBS.CONTROL.EventCmd_ProcessorData.
Port1Status.LastError - Last error code