PLANET NVR-1615 - Manual (Page 3)

2.3 Rear Panel
PWR eSATA
12V D+ D
-
DI 0 DI 1 DI 2 DI 3 GND DO 0 DO 1 DO 2 DO 3
HDMI LAN
RESET
USB
MIC IN
AUDIO OUT
VGA
12V DC
I/O
HDMI
Reset
LAN
Audio
e-SATA
VGA USB
Connector Description
USB Connect your mouse and USB flash disk for local display control and backup.
Reset Press and hold reset button to factory default.
HDMI HDMI output
VGA VGA output
e-SATA External E-SATA HDD
LAN 10/100/1000Mbps network.
I/O DI x 4 / DO x 4
Audio Audio out / Mic in
Chapter 1. Introduction
Thank you for purchasing PLANET 9/16-Ch Network Video Recorder. The Network Video
Recorder is designed for usage within a surveillance system, and performs recordings and
playbacks pictures from network cameras in the system. It is a recording device using a
hard disk drive to record camera pictures instead of using video tapes so that pictures
recorded by repeated overwriting will not experience deterioration of the recorded picture
quality. Up to 9 (NVR-915) and 16 (NVR-1615) cameras can be connected via a network and
it is possible to record their camera pictures. It is possible to perform the settings or operate
the NVR using a web browser installed on a PC connected to a network, or local display.
Recorded video can be played back from remote site by a PC. The NVR is compatible with
most major brand cameras and its ability to automatically search and find the available
cameras on the network can greatly reduce the user effort when expanding the system.
1.1 Before Installation
Before installation, please be sure to read this quick installation guide and user’s manual
(CD) carefully to complete machine installation. This guide shows how to quickly set up the
NVR.
2.4 HDD Installation
1. Remove all screws on the box.
2. Lift up and remove the cover.
Chapter 2. Physical Description and Installation
2.1 Package Centents
1 x NVR 1 x Power Adapter 2 x SATA Data Cord
2 x SATA Power Cord 1 x CD-ROM 16 x Screws
2 x HDD Cradle 1 x Quick Installation Guide
2.2 Front Panel
PWR HDD LAN REC Event
Alarm CAM 1 2
Digital In
3 4 1 2 3 4
Network Video Recorder
Digital Out
USB
PWR/HDD/LAN/REC/Event Status LEDs USB
DI/DO Status LEDs Alarm/Camera Status LEDs
LEDs Color Description
PWR Green LED on when system is ready.
HDD Green LED on when HDD is reading or writing.
LAN Blue LED blinking when network is connected.
REC Green LED on when record schedule is on.
Event Green LED on when event detection schedule is on.
Alarm Amber LED on when hard disk writes error.
CAM Amber LED on when system has camera disconnected.
Digital In (1~4) Amber LED on when digital input X is closed.
Digital Out (1~4) Blue LED on when digital output X is closed.