PLANET NVR-1615 - Manual (Page 10)

3. Assemble the hard disk cradles with the silver screws.
4. Install the hard disks in the case with the black screws.
5. Connect the SATA data cable and power cable between hard disk and main board.
6 Put the cover back.
7. Assemble all the screws back to the box.
Chapter 3. Connection and Management
3.1 Connection
IP Camera
PoE Gigabit Switch
User PC
IP Camera
NVR-915/NVR-1615
PoE PoE
1000Base-T UTP
PoE
1000Base-T UTP with PoE
3.2 Management
Utility
Installing “Planet IP Wizard II” search utility from the CD
1. Please go to Start => Programs => PLANET IP Wizard II => PLANET IP Wizard II to run
the search tool. Then you will see the utility start searching the network.
2. The NVR should be located and its IP address should be displayed: Double-click on it and
the program should automatically access the NVR’s web administration page from your
default browser.
Login the Homepage
The Web management allows you to access and manage the Network Video Recorder
easily. Launch the Web browser and then enter the IP address. The default IP address is
192.168.0.20. And, fill out the User Name and Password to login the Web management.
The default User Name and Password are both admin.
Further configurations and information can be found in the user’s manual CD.