2 ptz setting – PLANET IVS-H120 User Manual

Page 50

3.6.2 PTZ Setting

This page allow user to modify the RS485 interface according to the P/T scanner.

Camera Protocol:

This device can connect to a PTZ camera or speed dome camera and
controls them thru RS485 interface.

Camera Address:

This is the camera ID set in PTZ camera or speed dome camera.

Note that please DO NOT changes the default value if unnecessary.
If so, user needs to check and set value properly for both sides.

Baud rate:

This is the communication speed between network module and P/T
scanner.

NOTE:

If need to change these parameters, user needs to check and set
value properly for both, network module and P/T scanner.